Statewide Emergency Soot Removal in USA
The flames are out and the engines are gone, and you are left in the yard trying to work out the next move. One free call to Unify Fire Solutions connects you with a licensed and insured independent restoration contractor who works in your part of USA. We answer around the clock, and dispatch starts while you are still on the phone.
- A free referral line that answers 24/7, holidays included
- Independent crews working in every part of USA
- A written, line-item estimate before work starts
- Help lining up paperwork your insurance adjuster will ask for
One phone number for fire calls across USA
Unify Fire Solutions does not do restoration work. We run the dispatch desk that gets a qualified independent contractor headed your way.
Almost nobody has been through a house fire before, so the sequence of decisions is a mystery. Who do you call first, the insurance company or a contractor? Can you go back inside? Who turns the power back on? Our dispatchers hear those questions all day from callers across USA, and a few minutes on the phone usually sorts out the first steps.
When you call +1-833-336-1630, a live dispatcher asks a short set of questions: the property type, whether the fire department has released the scene, whether there is standing water from the hoses, and whether the roof or windows are open to the weather. Your answers tell us which independent crew in our network fits the job and how quickly the first visit needs to happen.
Every contractor we refer is a licensed and insured independent business that works locally. They own their equipment, employ their own crews, write their own estimates and answer for their own work. Our job is the connection: getting a qualified local pro on the phone with you at 2 a.m. instead of leaving you to scroll through search results on a cracked phone screen.
Calling costs nothing, and the line is staffed 24/7, including weekends and holidays. From a single-family home to a rented duplex, a condo unit or a storefront, the routing works the same way anywhere in USA.
Have a few things handy when you call, if you can: the property address, the name of your insurance company, your claim number if you already have one, and the incident number from the fire department. If you don't have any of that yet, that's fine. Lots of callers reach us from a neighbor's porch with only a phone, and the dispatcher will help you work out what to collect next.
What independent Soot Removal crews in USA do
A fire leaves three separate problems behind: charred materials, smoke residue that spreads through the whole building, and the water used to knock the fire down. Below is how the independent contractors in our network handle each piece.
Emergency response and mitigation
Mitigation means stopping the damage from getting worse, and in fire work the clock is unforgiving. Soot is acidic. In a matter of hours it yellows plastics and vinyl, and after a day or two it can etch glass, pit chrome and permanently stain grout. Wet drywall and insulation from the hose lines can begin growing mold in 24 to 48 hours.
The contractor who arrives typically begins with a safety walk and then secures the structure. That often means boarding broken windows and doors with plywood, tarping holes in the roof, and setting temporary fencing if the property sits close to a sidewalk. Then the water: extraction units pull standing water from carpet and subfloor, and soaked carpet pad is generally cut out and bagged.
With the building stable, crews run HEPA air scrubbers to pull fine soot out of the air, sometimes under negative pressure so particles stay out of unaffected rooms. Dehumidifiers and air movers go in where moisture meters show wet framing or drywall.
- Board-up of windows, doors and wall openings
- Tarps on the roof to keep weather off open framing
- Extraction of firefighting water and removal of wet materials
- HEPA air scrubbing plus moisture readings
Single-family homes and condo units
Even when the flames stayed in one room, the damage almost never does. Smoke follows air pressure and temperature, which is why you find black rings around outlets in a bedroom at the far end of the hall, or soot lines on the carpet along the baseboards. A residential crew first maps how far the residue spread, room by room, before anyone touches a surface.
Dry soot from a fast, hot fire is powdery, so crews lift it with dry chemical sponges and HEPA vacuums. Wet, smeary smoke from a slow, smoldering fire is oily and needs alkaline cleaners and a lot more labor. Kitchen fires leave protein residue, a nearly invisible film that smells terrible and turns surfaces sticky. Every residue needs its own chemistry, and the wrong product can push the stain further into paint and wood.
Charred materials get removed down to sound framing. Framing that is only blackened, not structurally weakened, is often cleaned with soda or dry ice blasting and then sealed with a shellac-based or pigmented sealing primer to lock in odor before new drywall goes up. It is fair to ask the crew which studs will stay and which will go, and to have that written into the estimate.
- Soot mapping and surface testing before cleaning
- Selective demolition of charred drywall, insulation and trim
- Blasting and sealing of smoke-stained framing
Commercial property, rentals and apartment buildings
When the property is a business or a rental, the questions multiply. A restaurant owner needs to know when the hood system can be inspected and the health inspector called back. A landlord needs to know which units are habitable and which tenants need temporary housing. A property manager with a fire in one unit of a fourplex needs smoke contained before it migrates through shared attic space and ductwork.
Commercial-focused contractors tend to work in phases so part of the building can stay open. They build temporary poly containment walls with zip-door access, run negative air machines, and schedule the loudest demolition for nights or weekends. For a retail space, that might mean the sales floor reopens while the stockroom is still under containment.
Inventory is its own problem. Smoke-exposed food, medication, cosmetics and anything in permeable packaging usually has to be discarded and documented for the claim. Ask the crew to photograph and list disposed inventory with quantities so your business interruption and property claims line up.
- Phased work plans that keep part of the space open
- Containment between occupied and damaged units
- Inventory disposal lists for the claim file
Apartment and condo buildings bring building code into play. Fire-rated assemblies, such as the drywall between units or around a stairwell, have to be rebuilt to the same rating, and damaged fire alarm or sprinkler components need a licensed trade to restore them. Ask whether those items are in the estimate or will be handled by a separate contractor.
Landlords and property managers: request a brief written status for each unit, livable or not, that you can forward to tenants and your carrier that day.
Contents cleaning, odor control, ductwork and water
Ask any fire survivor and they mention the smell. It gets into clothes, mattresses, the couch, the kids' stuffed animals, and the inside of every closed drawer. Contents crews pack out what can be saved, inventory each box, and clean it off site, using ultrasonic tanks for hard items and specialty laundering for fabric. Electronics often go to a separate vendor who can clean the circuit boards before soot corrodes them.
Odor control happens after cleaning, never instead of it. Crews may use thermal fogging, which mimics the heat of the fire to carry deodorizer into the same pores the smoke reached, or hydroxyl generators that can run while people are present. Ozone treatment is effective but requires an empty building, no people, pets or plants, so ask before it is used.
If the HVAC system was running during the fire, the ductwork pulled smoke through every room it serves. A duct cleaning crew will inspect the air handler, coil and duct runs, clean or replace flex duct, and swap filters. It is reasonable to ask whether the contractor works to IICRC guidance, including S700 for fire and smoke damage and S500 for water damage.
- Contents pack-out with an itemized inventory
- Odor treatment by thermal fog, hydroxyl or ozone
- Air handler, coil and duct inspection and cleaning
Firefighting water is the part people underestimate. An engine can put hundreds of gallons into a building in a few minutes, and it runs down into wall cavities, under cabinets and through ceilings to the floor below. Because it carries soot and ash, it is contaminated, which is why soaked carpet, pad and insulation usually come out instead of being dried in place. Crews remove baseboards or drill small holes to ventilate wall cavities, then track readings until the framing returns to a normal dry level.
- Drying of wall cavities soaked by hose water
- Electronics cleaned by a specialty vendor
Just got the all-clear from the fire department?
Call the free line, and a dispatcher will talk you through the next hour while lining up an independent crew close by.
Call +1-833-336-1630What a referral through Unify Fire Solutions looks like
Nobody can promise the cost of a fire job or the length of a rebuild. These are the things we can say plainly.
Line-item estimates in writing
Before any work begins, the contractor should hand you a written estimate broken out line by line, so ask for it. Many crews in USA build estimates in the same software adjusters use, so the two documents can be compared side by side.
Fast dispatch, any hour
Someone answers 24/7, and dispatch begins as soon as you call. Arrival time depends on which crews are free and how far away they are, and it is often the same day.
Local crews across the state
The network reaches cities, suburbs and rural communities throughout USA. You are matched with a crew that works near you and knows how the local building office and utilities run.
Licensed and insured pros
Every referral goes to a licensed and insured independent contractor. Even so, check the license and request a certificate of insurance before you sign, and ask if the crew works to IICRC S700 guidance.
Another contractor if the first isn't right
If the first contractor turns out not to be the right fit, call us again and we'll connect you with someone else. It might be scheduling, a second estimate your adjuster asked for, or just a bad fit in personality. Any of those is a fine reason.
On bigger fire losses, a second estimate is normal, and plenty of adjusters prefer it. Make sure both estimates cover the same scope, line for line, so the comparison is fair.
Your statewide fire recovery decision guide
No two fires are alike, yet the sequence of decisions is remarkably similar anywhere in USA. Work through this list while a crew is on the way.
- 1
Safety first, then the call
Don't go back in until the fire department says you can. Then call +1-833-336-1630. A dispatcher will ask about the scene, the water, and any open roof or windows, and will start looking for a crew right away.
- 2
Arrival and site security
The contractor walks the property with you, documents it in photos, and boards or tarps openings. If water is standing, extraction often starts on the first visit.
- 3
Written scope and estimate
You get a written, line-item estimate that separates emergency mitigation from repairs. You or the contractor share it with your adjuster, and nothing beyond emergency stabilization should start until you sign.
- 4
Cleaning, drying and deodorizing
Crews remove charred materials, dry the structure, clean soot from every affected surface, and treat odor. Daily moisture logs and photos give the adjuster a clear record of progress.
- 5
Rebuild and final walkthrough
Permitted repair work comes next: framing, electrical, drywall, paint and floors. Before paying the final bill, walk through with the contractor and write down anything still unfinished.
In the first hour, before a crew gets there: make sure every person and pet is out and accounted for. Wait for the fire department to release the scene before going back in, and leave the breaker panel alone. Ask the firefighters for the incident number and write it down, because your insurer will need it. If you can safely do so from outside, take wide photos and video of every side of the building.
Fire department release and red-tagged properties
The fire department controls the property until it formally releases the scene. If investigators are still working out the cause, you may be kept out for hours or, occasionally, a couple of days.
After the release, a building official from your city or county may post a placard. A green tag generally means the building can be occupied, a yellow tag means limited entry, and a red tag means nobody goes in until the structure is evaluated. The placard system differs from one jurisdiction to the next in USA, so read the notice and call the number on it.
A red tag doesn't stop mitigation from the outside. Contractors can still board up, tarp the roof and fence the site, and many will coordinate with a structural engineer to get the tag lifted.
Utility shutoffs after a fire
During the fire, crews often pull the electric meter and shut the gas. Once a utility has been shut off for a fire, the provider usually will not restore service until the system is inspected, and sometimes a licensed electrician or plumber must sign off first.
For that reason, restoration crews usually arrive with generators to power the scrubbers and dehumidifiers. Call your electric, gas and water providers yourself to report the fire and ask what they need to restore service.
If the water is still on and a pipe burst in the heat, find the main shutoff and close it. You'll usually find it near the meter or where the supply enters the building.
Working with your insurance adjuster
Call your insurance company the same day and get a claim number. Nearly every policy expects you to prevent additional damage, and that is the purpose of emergency mitigation. You do not need to wait for the adjuster before boarding, tarping and drying, but keep every receipt.
Contractors throughout USA normally bill in two parts: a mitigation invoice for board-up, water removal, drying and cleanup, and a restoration invoice for the rebuild. Adjusters handle the two differently, so separating them keeps the claim moving. Ask for dated photos, daily moisture logs, and a contents inventory, and request copies of everything sent to the insurer.
If the home isn't livable, many policies include additional living expenses (sometimes called loss of use) for temporary housing, meals and similar costs. Coverage limits differ, so ask your agent what yours includes and save every receipt.
Permits and local building departments
Cleanup and mitigation work typically doesn't require a permit. Structural repair, electrical rewiring, new framing, roof replacement and HVAC replacement almost always do. Permits in USA are issued by local city or county building departments, so the forms, fees and inspection schedules vary from one place to the next.
An experienced local contractor will know the nearby office and will typically pull the permit under their own license. Confirm the permit is posted and inspections are passed before anyone closes the walls. Your insurer may ask for the final inspection record before releasing the last payment.
Opening the walls of an older home can bring up new issues. If the building is old enough to contain asbestos in drywall texture, flooring or duct wrap, or lead in the paint, testing may be required before demolition. The repairs might also need to meet today's code instead of the original one, and some policies cover that under ordinance or law coverage, so ask your agent.
Landlord and tenant responsibilities
With a rental property, the structure and the renter's belongings typically fall under different policies. Usually the owner's policy covers the building and fixtures, and the renter's policy covers the tenant's furniture, clothes and temporary housing.
Owners should put access, timelines and habitability decisions in writing for tenants. Tenants should photograph their own belongings before the pack-out and get a copy of the contractor's contents inventory. Rules for both sides come from USA law and the lease, so review the lease and contact a local housing office or attorney with questions.
Either party can call the line. In most cases the owner signs for the building work and the tenant handles the contents claim, and one crew can do both if everyone agrees.
Getting a small business back open
A shuttered business loses money every day, which makes fast mitigation even more important. Ask your commercial carrier about business interruption coverage and track lost income starting on day one.
Food service, salons, clinics and grocers usually need a health or fire inspection before they can reopen. Ask the contractor for a phased schedule and a written list of what must be finished before each inspection.
Back up the point-of-sale system, payroll records and customer files before anyone moves the computers. Then tell your landlord, if you lease the space, because the lease usually spells out who pays for which repairs.
Why 24 to 72 hours is the window: soot keeps etching surfaces, wet materials start to grow mold, and odor soaks deeper into porous materials every day it sits. Starting mitigation quickly is usually the single biggest factor in how much of your home can be cleaned rather than replaced.
What callers across USA told us afterward
Shared with permission. Names shortened for privacy.
Our dryer vent caught fire late at night, and when the firefighters finally cleared us I couldn't think at all. The dispatcher asked a few plain questions and reminded me to grab the incident number before the engine pulled away. The contractor was there the next morning, boarded the laundry room, and had extraction going before my adjuster even called back.
I have two duplexes I rent out, and one of my tenants had a stovetop fire. The best part was that the contractor split the mitigation bill from the rebuild estimate. My adjuster approved the first one within a week, and the tenant next door never had to move out because the crew sealed the shared wall and attic.
We rented our place and the fire started in the unit below us. I didn't know my renter's policy would pay for a hotel until the dispatcher suggested I ask my agent. The crew boxed up our clothes and the kids' toys and handed me a typed inventory, which made the claim much simpler.
A grease fire shut down my restaurant on a Friday. The contractor set up plastic walls so we could get the dining room cleaned and inspected while they kept working on the kitchen. They wrote out exactly what needed finishing before the health inspection, and we passed on the first try.
The first company I was sent couldn't start for almost a week. I called back, said that wouldn't work, and the dispatcher connected me with a different crew who started the next day. No argument, no hassle. That is all I wanted.
Common questions from callers in USA
How fast can a Soot Removal technician arrive in USA?
Dispatch starts the moment you call, and the phone is answered 24/7. How soon a crew arrives depends on which independent contractors are available and how far they are from your property. In most of USA it is often the same day, and the dispatcher will tell you what to expect before you hang up.
Do you provide upfront pricing?
Unify Fire Solutions doesn't set prices, because we don't do the work. The independent contractor provides a written, line-item estimate before work starts, and you should ask for one before signing anything. Emergency board-up or water extraction may begin right away to prevent more damage, but ask the crew to explain those charges in writing too.
What emergency services are available?
The crews we refer usually cover board-up, tarping, extraction of firefighting water, drying, soot removal, air scrubbing and deodorization. Many also offer contents pack-out and storage, HVAC and duct cleaning, and full rebuilding after the cleanup. Describe the damage to the dispatcher and we'll connect you with a crew that handles it.
Do contractors in US work directly with my insurance company?
Most independent contractors in US are used to working alongside insurance adjusters. They build a file with photos, moisture logs and a line-item estimate, and with your OK they'll send it to the adjuster. Keep in mind the policy is between you and your insurer, so you make the final decisions and should keep copies of everything.
Do I need a permit for fire damage repairs in USA?
Cleanup and drying generally don't need one, while structural, electrical, roof and HVAC work nearly always does. Your city or county building department issues permits in USA, and the rules differ from place to place. A local contractor will usually pull the permit and schedule inspections for you.
Can I stay in my house after a fire?
That depends on what the fire department and the local building official say, and whether power, water and heat can be safely restored. Even after a minor fire, soot and odor can make the home unhealthy to sleep in, particularly for children, older adults and people with asthma. Ask your insurer whether your policy includes additional living expenses for temporary housing.
Should I call my insurance company or a contractor first?
Do both the same day, in whichever order you can. Nearly every policy expects you to stop additional damage, so boarding and water removal shouldn't wait on the adjuster. Get a claim number, keep every receipt, and let the contractor know your claim number so their paperwork matches.
What should I throw away after a fire?
Throw out food, medicine and cosmetics that were exposed to heat, smoke or firefighting water. Before you toss anything else, photograph it and list it for the claim; the contractor can help decide what is salvageable. Clothing, dishware and solid furniture that look ruined can often be cleaned.
Is it safe to clean up soot myself?
Wiping soot with a wet rag usually smears it deeper into paint and fabric, and some residue contains acids and fine particles you don't want to breathe. If you go inside to grab essentials, wear an N95 mask and gloves and don't run fans or the HVAC. Leave the cleaning to the crew, who will test the residue and choose the right chemistry.
Does Unify Fire Solutions serve every part of USA?
The network covers metro areas, suburbs and rural towns across USA. In remote areas the nearest crew may be farther away, so the dispatcher will be upfront about expected timing. Call +1-833-336-1630 with the property address and we'll let you know who can reach it.
Soot Removal coverage throughout USA
A single number connects you with independent crews anywhere in USA, from crowded metro blocks to farmhouses on long rural roads.
In metro areas, there are usually several contractors within reach, so the dispatcher can match on specialty, like commercial kitchens or high-rise condos. Suburban crews see plenty of attached garage fires, dryer vent fires and kitchen fires in single-family houses. In rural USA the closest crew may drive farther and usually brings generators and trailers, since utilities can take longer to come back.
- Single-family homes
- Condos and townhouses
- Apartment buildings
- Rental duplexes
- Mobile and manufactured homes
- Restaurants
- Retail stores
- Offices
- Warehouses
- Churches and schools
- Detached garages
- Barns and outbuildings
Callers tell us about kitchen fires, clogged dryer vents, space heaters, wiring faults, candles, lightning, grills, garage fires, furnace puff-backs and fires that spread from next door. No matter how it started, the first call is the same.
You can call even if you live elsewhere and the fire is at a rental you own or a relative's house. The dispatcher can work with a neighbor, tenant or manager who is on site, and the contractor can email you photos and the written estimate before anything past emergency stabilization starts.
