24/7 Emergency Emergency Fire Board Up in USA
The flames are out and the engines are gone, and you are left in the yard trying to work out the next move. One free call to Unify Fire Solutions connects you with a licensed and insured independent restoration contractor who works in your part of USA. Someone picks up at any hour, and dispatch begins before you hang up.
- A free referral line that answers 24/7, holidays included
- Independent local crews serving every corner of USA
- Written, line-item estimates before any work begins
- Help lining up paperwork your insurance adjuster will ask for
One phone number for fire calls across USA
Unify Fire Solutions does not do restoration work. We run the dispatch desk that gets a qualified independent contractor headed your way.
Almost nobody has been through a house fire before, so the sequence of decisions is a mystery. Who do you call first, the insurance company or a contractor? Can you go back inside? Who turns the power back on? Our dispatchers field these questions every day, from every part of USA, and we can usually point you in the right direction in a few minutes.
When you call +1-833-336-1630, a live dispatcher asks a short set of questions: the property type, whether the fire department has released the scene, whether there is standing water from the hoses, and whether the roof or windows are open to the weather. Your answers tell us which independent crew in our network fits the job and how quickly the first visit needs to happen.
The contractors we connect you with are licensed and insured independent businesses based in or near your community. They own their equipment, employ their own crews, write their own estimates and answer for their own work. We handle the connection, so at 2 a.m. you are talking with a qualified local pro instead of scrolling through search results on your phone in the dark.
Calling costs nothing, and the line is staffed 24/7, including weekends and holidays. From a single-family home to a rented duplex, a condo unit or a storefront, the routing works the same way anywhere in USA.
It helps to have a few details ready: the property address, your insurer's name, a claim number if you have one, and the fire department's incident number. Don't worry if you have none of it yet. Plenty of people call from a neighbor's porch with nothing but a phone, and the dispatcher will help you figure out what to gather next.
What independent Emergency Fire Board Up crews in USA do
A fire leaves three separate problems behind: charred materials, smoke residue that spreads through the whole building, and the water used to knock the fire down. Here is how the independent contractors in our network approach each one.
Emergency response and mitigation
Mitigation means stopping the damage from getting worse, and in fire work the clock is unforgiving. Soot is acidic. In a matter of hours it yellows plastics and vinyl, and after a day or two it can etch glass, pit chrome and permanently stain grout. Wet drywall and insulation from the hose lines can begin growing mold in 24 to 48 hours.
The contractor who arrives typically begins with a safety walk and then secures the structure. That often means boarding broken windows and doors with plywood, tarping holes in the roof, and setting temporary fencing if the property sits close to a sidewalk. Then the water: extraction units pull standing water from carpet and subfloor, and soaked carpet pad is generally cut out and bagged.
With the building stable, crews run HEPA air scrubbers to pull fine soot out of the air, sometimes under negative pressure so particles stay out of unaffected rooms. Dehumidifiers and air movers go in where moisture meters show wet framing or drywall.
- Board-up of windows, doors and wall openings
- Roof tarping to keep rain off exposed framing
- Water extraction and tear-out of soaked materials
- HEPA air scrubbing plus moisture readings
Homes, condos and townhouses
A house fire rarely stays in one room, even when the flames did. Smoke follows air pressure and temperature, which is why you find black rings around outlets in a bedroom at the far end of the hall, or soot lines on the carpet along the baseboards. A residential crew starts by mapping how far the residue traveled, room by room, before anything gets wiped.
Dry soot from a fast, hot fire is powdery and comes off with dry chemical sponges and HEPA vacuums. Wet, smeary smoke from a slow, smoldering fire is oily and needs alkaline cleaners and a lot more labor. Kitchen fires leave protein residue, a nearly invisible film that smells terrible and turns surfaces sticky. Each type takes a different chemistry, and using the wrong one can drive the stain deeper into paint or wood.
Charred materials get removed down to sound framing. Framing that is only blackened, not structurally weakened, is often cleaned with soda or dry ice blasting and then sealed with a shellac-based or pigmented sealing primer to lock in odor before new drywall goes up. Ask the contractor to show you which studs they plan to keep and which they plan to replace, and to note it on the estimate.
- Residue mapping and spot tests before any cleaning
- Selective demolition of charred drywall, insulation and trim
- Framing cleaned by blasting, then sealed
Commercial property, rentals and apartment buildings
When the property is a business or a rental, the questions multiply. A restaurant owner needs to know when the hood system can be inspected and the health inspector called back. A landlord needs to know which units are habitable and which tenants need temporary housing. A property manager with a fire in one unit of a fourplex has to stop smoke from moving through the shared attic and ducts.
Commercial-focused contractors tend to work in phases so part of the building can stay open. They build temporary poly containment walls with zip-door access, run negative air machines, and schedule the loudest demolition for nights or weekends. For a retail space, that might mean the sales floor reopens while the stockroom is still under containment.
Inventory is its own problem. Smoke-exposed food, medication, cosmetics and anything in permeable packaging usually has to be discarded and documented for the claim. Ask the crew to photograph and list disposed inventory with quantities so your business interruption and property claims line up.
- Phased schedules so a portion of the business can reopen
- Containment between occupied and damaged units
- Inventory disposal lists for the claim file
Multi-unit buildings add a building code question. Fire-rated assemblies, such as the drywall between units or around a stairwell, have to be rebuilt to the same rating, and damaged fire alarm or sprinkler components need a licensed trade to restore them. Ask whether those items are in the estimate or will be handled by a separate contractor.
Landlords and property managers: request a brief written status for each unit, livable or not, that you can forward to tenants and your carrier that day.
Contents cleaning, odor control, ductwork and water
The smell is what most people remember afterward. It gets into clothes, mattresses, the couch, the kids' stuffed animals, and the inside of every closed drawer. Contents crews pack out what can be saved, inventory each box, and clean it off site, using ultrasonic tanks for hard items and specialty laundering for fabric. Electronics often go to a separate vendor who can clean the circuit boards before soot corrodes them.
Deodorization comes after the cleaning, not as a substitute for it. Crews may use thermal fogging, which mimics the heat of the fire to carry deodorizer into the same pores the smoke reached, or hydroxyl generators that can run while people are present. Ozone works well but the building has to be empty of people, pets and plants, so ask about it first.
If the HVAC system was running during the fire, the ductwork pulled smoke through every room it serves. A duct cleaning crew will inspect the air handler, coil and duct runs, clean or replace flex duct, and swap filters. It is reasonable to ask whether the contractor works to IICRC guidance, including S700 for fire and smoke damage and S500 for water damage.
- Pack-out, inventory and off-site contents cleaning
- Thermal fogging, hydroxyl or ozone deodorization
- Inspection and cleaning of ducts, coil and air handler
Firefighting water is the part people underestimate. A single engine can pour hundreds of gallons into a house in minutes, and that water finds its way into wall cavities, under cabinets and down through ceilings. Mixed with soot and ash, it is dirty water, so wet carpet, pad and insulation are usually removed rather than dried in place. Crews pull baseboards or drill small vent holes to dry wall cavities, and they log moisture readings until the framing is back to a normal dry level.
- Drying of wall cavities soaked by hose water
- Electronics cleaned by a specialty vendor
Just got the all-clear from the fire department?
Call the free line and a dispatcher will walk you through the next hour and start finding an independent crew near you.
Call +1-833-336-1630What you can expect from a Unify Fire Solutions referral
Nobody can promise the cost of a fire job or the length of a rebuild. These are the things we can say plainly.
Written estimates up front
Before any work begins, the contractor should hand you a written estimate broken out line by line, so ask for it. Most crews in USA write estimates in the same software insurance adjusters use, which makes comparing the two much easier.
Fast dispatch, any hour
Someone answers 24/7, and dispatch begins as soon as you call. Arrival time depends on which crews are free and how far away they are, and it is often the same day.
Independent crews working statewide
Our network covers metro areas, suburbs and small towns throughout USA. You are matched with a crew that works near you and knows how the local building office and utilities run.
Licensed and insured pros
We refer callers only to licensed and insured independent contractors. Even so, check the license and request a certificate of insurance before you sign, and ask if the crew works to IICRC S700 guidance.
A second option if you need one
If the first contractor isn't the right fit, for any reason, call back and we'll connect you with another one. Sometimes the schedule doesn't work, sometimes you want a second estimate for the adjuster, and sometimes it is simply a personality mismatch. That's fine.
On bigger fire losses, a second estimate is normal, and plenty of adjusters prefer it. Make sure both estimates cover the same scope, line for line, so the comparison is fair.
Your statewide fire recovery decision guide
No two fires are alike, yet the sequence of decisions is remarkably similar anywhere in USA. Use this as a checklist while you wait for a crew.
- 1
Safety first, then the call
Don't go back in until the fire department says you can. Then call +1-833-336-1630. A dispatcher will ask about the scene, the water, and any open roof or windows, and will start looking for a crew right away.
- 2
Crew arrives and secures
The independent contractor walks the property with you, photographs everything, and boards or tarps any openings. Where water is pooled, extraction frequently begins on the very first visit.
- 3
Written scope and estimate
You receive a written estimate, line by line, with mitigation split out from rebuild work. You or the contractor share it with your adjuster, and nothing beyond emergency stabilization should start until you sign.
- 4
Clean-up, drying and odor work
The crew tears out burned materials, dries the building, cleans soot from each surface, and deals with the odor. Daily moisture logs and photos give the adjuster a clear record of progress.
- 5
Repairs and final walkthrough
Permitted repair work comes next: framing, electrical, drywall, paint and floors. Before the final invoice, walk the property with the contractor and make a punch list of anything left undone.
The first hour, before any crew arrives: make sure every person and pet is out and accounted for. Wait for the fire department to release the scene before going back in, and leave the breaker panel alone. Write down the incident number the firefighters give you; your insurer will ask for it. If you can safely do so from outside, take wide photos and video of every side of the building.
When the fire department releases the scene
The fire department controls the property until it formally releases the scene. If investigators are still working out the cause, you may be kept out for hours or, occasionally, a couple of days.
After the release, a building official from your city or county may post a placard. A green tag generally means the building can be occupied, a yellow tag means limited entry, and a red tag means nobody goes in until the structure is evaluated. Placard systems vary by jurisdiction across USA, so read the notice carefully and call the number printed on it.
A red tag doesn't stop mitigation from the outside. Contractors can still board up, tarp the roof and fence the site, and many will coordinate with a structural engineer to get the tag lifted.
Utility shutoffs after a fire
Firefighters often cut power at the meter and close the gas valve during the fight. After a fire shutoff, the utility typically won't turn service back on until an inspection, and in some cases a licensed electrician or plumber has to sign off first.
For that reason, restoration crews usually arrive with generators to power the scrubbers and dehumidifiers. Call your electric, gas and water providers yourself to report the fire and ask what they need to restore service.
If water service is still live and a line ruptured in the heat, close the main shutoff. You'll usually find it near the meter or where the supply enters the building.
How crews coordinate with adjusters
Report the loss to your insurer the same day and get a claim number. Most policies require you to take reasonable steps to prevent further damage, which is exactly what emergency mitigation is. You don't have to wait for the adjuster to approve boarding, tarping or drying, though you should keep every receipt.
Independent contractors across USA usually produce two separate invoices: one for mitigation (board-up, extraction, drying, soot cleanup) and one for restoration (rebuilding). Adjusters review each differently, so keeping them apart avoids delays. Ask the crew for time-stamped photos, daily drying logs and a contents list, and get a copy of whatever goes to the insurer.
When the home can't be lived in, many policies cover additional living expenses, also called loss of use, for things like a hotel and meals. Limits vary from policy to policy, so ask your agent what applies and keep all receipts.
Permits and local building departments
Cleanup and mitigation work typically doesn't require a permit. Structural repairs, rewiring, new framing, a new roof and HVAC replacement nearly always require one. Permits in USA are issued by local city or county building departments, so the forms, fees and inspection schedules vary from one place to the next.
An experienced local contractor will know the nearby office and will typically pull the permit under their own license. Confirm the permit is posted and inspections are passed before anyone closes the walls. Your insurer may ask for the final inspection record before releasing the last payment.
Older homes can raise extra questions once walls are open. If the building is old enough to contain asbestos in drywall texture, flooring or duct wrap, or lead in the paint, testing may be required before demolition. Repairs may also have to meet the current code rather than the code the house was built under, which some policies cover as ordinance or law coverage, so ask your agent.
Landlord and tenant responsibilities
With a rental property, the structure and the renter's belongings typically fall under different policies. Usually the owner's policy covers the building and fixtures, and the renter's policy covers the tenant's furniture, clothes and temporary housing.
Landlords should contact tenants in writing about access, timelines and whether the unit is habitable. Tenants should photograph their own belongings before the pack-out and get a copy of the contractor's contents inventory. Rules for both sides come from USA law and the lease, so review the lease and contact a local housing office or attorney with questions.
The landlord or the tenant can call us. In most cases the owner signs for the building work and the tenant handles the contents claim, and one crew can do both if everyone agrees.
Getting a small business back open
For a business, every closed day costs money, so speed of mitigation matters even more. Ask your commercial carrier about business interruption coverage and track lost income starting on day one.
Restaurants, salons, medical offices and food retailers will likely need a health or fire inspection before reopening. Ask the contractor for a phased schedule and a written list of what must be finished before each inspection.
Before the computers are moved, make sure your sales system, payroll and customer records are backed up. Then tell your landlord, if you lease the space, because the lease usually spells out who pays for which repairs.
Why 24 to 72 hours is the window: soot continues to etch finishes, wet building materials begin to grow mold, and smoke odor sinks further into porous surfaces every day. Getting mitigation going early is often the biggest factor in how much can be cleaned instead of thrown out.
What callers across USA told us afterward
Shared with permission, with last names shortened.
The dryer vent caught at about eleven at night. By the time the fire department cleared us, I couldn't think straight. The dispatcher asked a few plain questions and reminded me to grab the incident number before the engine pulled away. The contractor was there the next morning, boarded the laundry room, and had extraction going before my adjuster even called back.
I own two rental duplexes and one tenant had a kitchen fire. What helped most was the contractor keeping the mitigation bill separate from the rebuild estimate. My adjuster approved the first one within a week, and the tenant next door never had to move out because the crew sealed the shared wall and attic.
We rented our place and the fire started in the unit below us. I didn't know my renter's policy would pay for a hotel until the dispatcher suggested I ask my agent. The crew packed out our clothes and the kids' things and gave me a typed inventory, which made the claim a lot easier.
A grease fire shut down my restaurant on a Friday. The crew put up containment so the dining room could be cleaned and inspected while they kept going in the kitchen. They wrote out exactly what needed finishing before the health inspection, and we passed on the first try.
The first contractor I talked to couldn't begin for close to a week. I called back, said that wouldn't work, and the dispatcher connected me with a different crew who started the next day. No pushback and no runaround, which was exactly what I needed.
Common questions from callers in USA
How fast can a Emergency Fire Board Up technician arrive in USA?
We begin dispatching as soon as you call, and someone answers at any hour. Arrival depends on which independent crews are free and how far they have to drive to reach your property. Across much of USA it is often the same day, and the dispatcher will give you a realistic picture before the call ends.
Do you provide upfront pricing?
We don't set prices, since Unify Fire Solutions is a referral line and not the contractor. The independent contractor provides a written, line-item estimate before work starts, and you should ask for one before signing anything. Emergency board-up or water extraction may begin right away to prevent more damage, but ask the crew to explain those charges in writing too.
What emergency services are available?
Contractors in our network typically handle board-up, roof tarping, water extraction, structural drying, soot cleanup, HEPA air filtration and odor treatment. Many also offer contents pack-out and storage, HVAC and duct cleaning, and full rebuilding after the cleanup. Tell the dispatcher what you're seeing and we'll match you with a crew that does that work.
Do contractors in US work directly with my insurance company?
Most independent contractors in US are used to working alongside insurance adjusters. They document the damage with photos, moisture readings and a line-item estimate, and they can send that file to your adjuster with your permission. The policy is still your contract with your insurer, so you have the final say and should keep a copy of every document.
Do I need a permit for fire damage repairs in USA?
Cleaning and mitigation usually don't, but structural, electrical, roofing and HVAC repairs almost always do. Permits in USA are issued by your local city or county building department, and requirements vary by location. A local contractor will usually pull the permit and schedule inspections for you.
Can I stay in my house after a fire?
That depends on what the fire department and the local building official say, and whether power, water and heat can be safely restored. Even after a minor fire, soot and odor can make the home unhealthy to sleep in, particularly for children, older adults and people with asthma. Check with your insurer about additional living expense coverage for a hotel or rental.
Should I call my insurance company or a contractor first?
Do both the same day, in whichever order you can. Nearly every policy expects you to stop additional damage, so boarding and water removal shouldn't wait on the adjuster. Get a claim number, keep every receipt, and let the contractor know your claim number so their paperwork matches.
What should I throw away after a fire?
Throw out food, medicine and cosmetics that were exposed to heat, smoke or firefighting water. Before you toss anything else, photograph it and list it for the claim; the contractor can help decide what is salvageable. Clothing, dishware and solid furniture that look ruined can often be cleaned.
Is it safe to clean up soot myself?
Wiping soot with a wet rag usually smears it deeper into paint and fabric, and some residue contains acids and fine particles you don't want to breathe. If you must go in for essentials, wear gloves and an N95 mask, and keep fans and the HVAC off. Let the crew handle cleanup, since they'll test the residue and pick the correct products.
Does Unify Fire Solutions serve every part of USA?
The network covers metro areas, suburbs and rural towns across USA. Out in remote areas the closest crew may have a longer drive, and the dispatcher will tell you that up front. Call +1-833-336-1630 with the property address and we'll let you know who can reach it.
Statewide Emergency Fire Board Up coverage in USA
A single number connects you with independent crews anywhere in USA, from crowded metro blocks to farmhouses on long rural roads.
In metro areas, there are usually several contractors within reach, so the dispatcher can match on specialty, like commercial kitchens or high-rise condos. In suburbs, crews tend to handle a lot of attached garage fires, dryer vent fires and kitchen fires in single-family homes. In rural parts of USA, the nearest crew may travel farther, and they often arrive with generators and trailers because utility restoration can take longer.
- Single-family homes
- Condos and townhouses
- Apartment buildings
- Rental duplexes
- Mobile and manufactured homes
- Restaurants
- Retail stores
- Offices
- Warehouses
- Churches and schools
- Detached garages
- Barns and outbuildings
Callers tell us about kitchen fires, clogged dryer vents, space heaters, wiring faults, candles, lightning, grills, garage fires, furnace puff-backs and fires that spread from next door. No matter how it started, the first call is the same.
You can call even if you live elsewhere and the fire is at a rental you own or a relative's house. The dispatcher can coordinate with a neighbor, a tenant or a property manager on site, and the contractor can send photos and the written estimate to you by email before anything beyond emergency stabilization begins.
